AIR OPERATED BLADE / ROLLER STOP

Air Operated Blade Roller Stop

Applications / Features:

  • Air Operated Stops are used where automatic line control is required such as assembly work stations, shipping areas, etc.

  • Can be mounted to underside of models 138SR, 190SR, 20SR, 190CAP, 138CAP, 190ZPA.

  • Capacity – Blade -150 Ibs., 1-3⁄8″ roller – 50 Ibs., 1.9″ diameter roller -150 Ibs. All are live load capacities @ 60 FPM.

    Bearings – High capacity (2) bolt flange bearings.

    Stop – 1-3⁄8″ diameter x 18 gauge unplated steel roller for 1-3⁄8″ conveyors. 1.9″ diameter x 16 gauge galvanized steel roller for 1.9″ x 2.0″ conveyors.

    Blade – 1⁄4″ steel plate.

    Position – Supplied normally down. Can be supplied normally up specify.

    Air Cylinder – 11⁄4″bore x 2″ stroke double acting air cylinder to raise or lower stop.

    Air Requirements – Minimum pressure 60 PSI, maximum 100 PSI. Free air consumption @ 60 PSI – .014 cu. ft. per cycle, @ 100 PSI – .022 cu.ft.

    Valve – Single solenoid 4 way valve. 1⁄4″ spring return- 20 NPT valve ports.

    Electrical requirements – 120V, single phase, 60 Hertz. Current draw – .068 amps, or 24VDC.