MODEL 22CRRTS

Drive Chain – No. 40 circular roller chain.

Bed – Conveying surface width 14″, 16″, 18″, 24″, 28″ and 34″. 2-1⁄2″ diameter to 1-11⁄16″ diameter tapered rollers, 7⁄16″ hex shafts. Mounted in 10 gauge powder painted formed steel channel frame. Rollers are roller to roller driven.

Rollers – Tapered rollers in curve sections; Straight rollers in straight sections.

Chain Guard – Chain guard is mounted above frame to totally enclose drive chain.

Center Drive – Mounted underneath conveyor in center of curve.

Floor Supports – Adjustable 28″ to 42″ from floor to top of rollers. One support at each end and center leg on outer rail.

Motor – 1⁄2 HP 230/460-3-60 TE motor.

Speed Reducer – C-Face heavy duty worm gear.

Roller Speed – 60 FPM.

Capacity – 850 Ibs. total distributed live load.

Guard Rails – Adjustable channel, continuous channel,steel guard rails available.

Floor Supports – Lower or higher are available. Minimum elevation, 18″ from floor to top of rollers.

Ceiling Hangers – 1⁄2″ diameter threaded rods 8 feet long with locking nuts and mounting hardware. Other lengths are available.

Side Mounted Drive – Drive mounted to side of conveyor bed. Minimum elevation 6″. Specify which side drive is to be located.

Rollers Set Low – Tread rollers mounted low in 4-1⁄2″ x 10 gauge formed steel channel frame to form 3⁄4″ high guard rails.

Motor – Single phase, energy efficient, explosion proof, etc. Other HP are available.

Roller Speed – Constant and variable roller speeds available.

Electrical Controls – Magnetic starters and push button stations; manual motor starters with overload protection, others.